工廠自我評價（通用18篇）

工廠自我評價（通用18篇）

工廠自我評價 篇1

Under the leadership of the teacher we lined up into the Shaanxi flames limited liability company's production workshop, after the relevant person in charge of the distribution I and the other four students were assigned to the bakelite workshop.

Into the workshop, the master of the workers on the performance of our very happy, enthusiastic greeting me, as far as possible to me to introduce me to do the work, I just came in a sense of tension swept away. In the workers under the master's explanation we understand the next week's work content. And found that we seem to be doing a great cause, because we processed the antenna is to be installed in the tank above. And many of these antennas are sold abroad. The thought of their use of the antenna in some of their own to do, and my heart can not say proud.

The antenna body has four sections, connected to one from the low to high diameter in turn, from the bottom to the top in turn; a connecting base, 2 with a fixed rope, fixed rope and a metal, is used to connect the antenna , The main package a total of 7 positions, 7 accessories can be loaded into, and then a line of the rope, the antenna package folded to carry.

Our work that trouble to not trouble, but need to have enough first is to use a small blade to a white plastic end of a dust use the blade is very hand the school is very difficult to take, a long time, the hand will be blisters, even though we have to clean up, or inevitable, but the thought of these workers uncle for decades to do the job, admiration Feeling arises spontaneously. They are for the motherland of tomorrow, not afraid of suffering, then we have nothing to fear.

The second task is to remove the antenna under the core, there is the fiberglass shell to the gelatinization treatment, it seems simple, it is not true, because the plastic outside the plastic film is very hard, accidentally cut Finger, the master of the workers in the explanation, we found a small hand does not cut the hand tips. The third task is the casing, in order to prevent the antenna interference, will use the plastic tube to isolate the antenna.

The fourth work has a good name to listen to this is a high-tech live, in a one-meter-long plastic tube wearing a thin copper wire is only 0.3 ly is not an easy thing, even more depressing is that sometimes when you wear to the end of the moment, just so bad 2 cm, just can not pass, and my heart that hate Egypt do not know who invented the antenna practice, although complaining There are still, but we still learn to make fun of, we five people started the game, to see who wear the fast and. In this way the work was also very easy to solve. We summed up the truth - do not just have the patience to do this, there is another condition, that is luck, good luck, smooth. Bad luck, then move.

The fifth task is welding, this welding is different from the radio welding, it is the soldering iron fixed, mobile components to complete the welding. As the temperature is high, it requires us to fast, accurate, and requires a beautiful weldment.

The sixth task is to insulate small transformers with insulating work is the most easy to complete. Is the best learning.

The seventh job is the mat, although good to do, but need a little use there are many components will not affect the role of the antenna, so even if the production is not very qualified, in order not to waste, will continue to use. This requires a little more effort.

The eighth task is to tie the line, it sounds very easy to do it is not simple. The reason is not only to tie, but also tied labor, so as not to tamper with the antenna in the glass tank. Worker master taught us to tie the method, the beginning of the tie is very awkward, tied the number of more, even find work is the door to fun.

Week internship is the deepest feelings of some of the Fiberhome Group of dedicated workers. Here the workers are very amiable and friendly people, often some humorous words to our work to add fun. The most touching is that when we can not personally participate in the Olympic torch relay, they play radio for us so that we hear the whole process of tracking the torch relay.

The rapid development of modern science and technology era, the types of high-tech products more and more, production technology and production processes are also different. But no matter what kind of products, from raw materials to produce products are processed to follow certain production principles, through a number of major equipment and process to complete. And never try to use machines instead of manual, no matter how fast the machine can not replace human labor. And this is not only labor, or passion to pass.

工廠自我評價 篇2

3月23日在進入進廠實習階段我們在公司培訓中心接受有關人員對公司的基本情況介紹以及接受三級安全教育和保密員對實習生進行保密知識教育。分組到分廠和車間實習，主要在鎢鈷合金廠、110kv變電站和公司動力供應中心的維修車間維修電工班。工段有關領導向我們介紹情況並對我們提出實習期間的要求和車間的有關安全教育，並把我們分到班組跟師傅學習實踐，到班組後班長交待明天的工作內容以及實習期間的注意事項。

3月24日我們按照班組的要求早上八點到601幼兒園對一台變壓器的開關櫃更換。主要工作是將已經壞了的開關櫃換下換上新的，把有用的進行回收，期間要安裝變壓器保護罩、三相四線制數字式電能表(帶電流互感器)安裝，重新安裝斷路器並確定進櫃線的位置和保護管的孔徑大小並進行電焊切割定位，下午工作結束變電中心驗收合格後送電(填寫停/供電工作票)。工程完成以後班長交待明天的工作內容。

進入公司後我們首先是在維修車間，然後我分配在維修電一班，在班組跟着師傅學習了不少東西許多跟他們學習交流。更是通過虛心請教，在師傅的指導幫忙協助下，我很快的適應了這裏的工作，經過這幾天的過渡，我已經初步掌握了變壓器開關櫃安裝的步驟和工廠佈線接線規程等維修相關一些基本注意事項。不過對於相關的專業知識我知道甚少，於是我虛心請教師傅同時自己也閲讀相關的書籍，並細心專研，最終問題得到很好解決。

在車間實習的這段時間，雖然有時候工作很苦很累，但是，我從中體會到了實踐中的專業技術，不斷積累實踐技術經驗。通過生產實習，使我們瞭解和掌握了變壓器開關櫃的更換數字式電錶的安裝工廠線路佈線方法和步驟。為進一步學好專業技術，從事這方面的接線、佈線、調試、安裝等打下良好的基礎。

在這次生產實習過程中，不但對所學習的知識加深了了解，更加重要的是更正了我們的勞動觀點和提高了我們的獨立工作能力等。

工廠自我評價 篇3

一、通過系統完善的汽車專業知識的學習，有紮實的專業基礎知識，並且有一定的汽車管理知識。課外大量獵閲圖書館中汽車類書刊資料。瞭解中國汽車產業發展動態方向，特別是汽車後市場服務領域。知道汽車維修行業發展現狀及趨勢。善於學習新的知識方法工藝，分析和解決問題的能力強，能夠熟練的利用互聯網查詢汽車維修資料，收集本行業最新信息。

二、“老老實實為人，本本分做事”是一個立足社會的根本，也是我時刻銘記的一句話。勇於創新，善於開創，能承受較高的工作壓力；吃苦耐勞，注重合作，具有年輕人火一樣的工作熱情和活力。

三、學會把自己的技能應用在實際的應用上。

成為一個有技術，會管理，善經營汽車人，將是我一直努力和奮鬥的目標，我一定會成為一個有才能的汽車維修大師。

工廠自我評價 篇4

在專業實習過程中，我們首先要了解其生產原理，弄清生產的工藝流程和主要設備的構造及操作。其次，在專業人員指導下，通過實習過程見習產品的設計、生產及開發等環節，初步培養我們得知識運用能力。

在工人師傅的指導下，實際動手操作生產流程，鍛鍊了自己觀察能力及知識運用能力，社會工作能力得到了相應的提高。

在實習過程中，工人師傅還拿出製作好的成品為我們一一講解原理，併為我們解釋一些不懂的疑問。我相信這些東西使我們課本中永遠無法學到的東西。

在實習的過程中，我不僅從企業員工那裏學到了知識和技能，更使我學會了企業中科學的管理方式和感受到他們的敬業精神。感到了生活的充實和學習的快樂，以及獲得知識的滿足。真正零距離的接觸社會，使我們消除了走向社會的恐懼心裏，更使我們對未來充滿了信心，能以良好的心態去面對社會。與此同時，我們也體驗到了工作的艱辛，瞭解了當前社會大學生所面臨的嚴峻問題，促使自己努力學習更多的知識，為自己今後參加工作奠定良好的基礎。

本次實習我相信是我們每個人的美好開始，它讓我們認識到實踐出真知這句話的重要性。相信這將使我們以後學習和生活中不可多得的財富。

工廠自我評價 篇5

Over the past year, I have been dedicated to work in a creative and loving way, and have achieved some achievements. However, there are also some problems and shortcomings, mainly in the following points:

1. Safety aspects

Safety management did not do bit, strength is not enough; safety training is not in place; check not in place. In many cases, due to the labor intensity of the staff is larger, more physical exertion, so the completion of the day's output, do the work of sorting the scene ignored the phenomenon, there are irregularities in the operation of the repeated repeated crushing accidents . Now want to come to these accidents, I have an inescapable responsibility. First: in the organization and management team in the process of daily safety training is not really so that every employee will always be safe production in mind; Second: in the security check did not do the whole process of tracking the entire inspection; Finally: in the event of an accident did not promptly Sum up lessons learned to avoid the recurrence of similar incidents. So that my staff suffered pain, so that the damage to the honor and interests of the workshop I am very self-blame. To this end, I decided to work in the future to strengthen the intensity of safety training and improve the form of training and strengthen the security team security responsibilities, so that each team staff are aware of the importance of safety in production, resulting in "everyone's attention to safety Production, everyone involved in production safety, "a good atmosphere.

2. Quality control aspects

Quality is produced, rather than check out, that is to say about total quality management, in accordance with the objectives and requirements to seriously do a good job in every aspect, every the same time quality inspection is very important, especially in the production process of quality inspection can effectively avoid the occurrence of quality accidents and quality problems, after the event for the prevention and control in advance, change from passive to ough the company from top to bottom are beginning to pay attention to quality, but in practice there are still many problems, especially between the team, for example, in the weaving process there are many areas to be improved. To solve these problems is not a team can do a good job, which requires a number of relevant team work together, I think in order to do a good job of quality, we must grasp the "strict, fine, real" principle, to strict management, Careful and meticulous, pay close attention to implementation.

3. Team management

Although the management level of the team has been improved in the past year, there are still some problems, such as: the standardized work situation of the staff to be improved, the technical level of the staff to be improved, the enthusiasm of the staff has not been fully mobilized high-level management, there is no high-quality staff, there is no high-quality products. Therefore, I will focus on the future work to improve the overall quality of the team and staff issues, make full use of spare time, and more arrangements for some of the knowledge of the standardization of training, strive for a shorter period of time so that the overall quality of staff has a larger Promotion.

工廠自我評價 篇6

在實習過程中，我們先後瞭解了機械加工工藝的知識及方法，鑄造工藝及設備的知識，各種機牀和數控系統的知識，常用刀具的結構、選擇、用途等方面，我們通過實習瞭解到了實踐與理論的差異。 通過實習期間的體會，我更加深刻地認識到了理論和實踐並不是完全相同的，我們不能夠把書本上的知識照搬、照抄到生產中來，這樣不僅有時達不到理論效果，有時甚至會造成很大的經濟損失和資源浪費。所以，在以後的學習當中，我會注意理論和實踐的結合，學以致用，任何理論和知識只有與實踐相結合，才能發揮出作用。 將理論與實踐結合起來，包括各種設備的實物勘察和設備操作步驟以及注意事項，還有各工序實際上的流程。這些大都和書本上相同，通過對機械設備的觀察，彌補了理論知識的不足之處，加深了對知識的鞏固。

工廠自我評價 篇7

我的理念是：在年輕的季節我甘願吃苦受累，只願通過自己富有激情、積極主動的努力實現自身價值並在中做出最大的貢獻。

作為初學者，我具備出色的學習能力並且樂於學習、敢於創新，不斷追求卓越；作為參與者，我具備誠實可信的品格、富有團隊合作精神；作為領導者，我具備做事幹練、果斷的風格，良好的溝通和協調能力。受過系統的經濟相關專業知識訓練，有在多家單位和公司的和兼職；有很強的忍耐力、意志力和吃苦耐勞的品質，對工作認真負責，積極進取，個性樂觀執着，敢於面對困難與挑戰。

工廠自我評價 篇8

一、通過系統完善的汽車專業知識的學習，有紮實的專業基礎知識，並且有一定的汽車管理知識。課外大量獵閲圖書館中汽車類書刊資料。瞭解中國汽車產業發展動態方向，特別是汽車後市場服務領域。知道汽車維修行業發展現狀及趨勢。善於學習新的知識方法工藝，分析和解決問題的能力強，能夠熟練的利用互聯網查詢汽車維修資料，收集本行業最新信息。

二、“老老實實為人，本本分做事”是一個立足社會的根本，也是我時刻銘記的一句話。擁有良好的職業素質和職業操守，能夠忠於自己的企業，將個人">個人的職業生涯規劃與企業的發展緊密的結合。勇於創新，善於開創，能承受較高的工作壓力;吃苦耐勞，注重合作，具有年輕人火一樣的工作熱情和活力。

三:學會把自己的技能應用在實際的應用上...

成為一個有技術，會管理，善經營汽車人。將是我一直努力和奮鬥的目標。當然在這個人">個人才濟濟的社會中我不一定是最好的，但我一定會努力的擠身於這一優秀的行列之中。在中國的汽車業中實現自己的社會價值。 我一定會成為一個有才能的汽車維修大師..也感謝..給我一個這樣的平台寫出自我鑑定!!!!

工廠自我評價 篇9

Over the past year, I have been dedicated to work in a creative and loving way, and have achieved some achievements. However, there are also some problems and shortcomings, mainly in the following points:

1. Safety aspects

Safety management did not do bit, strength is not enough; safety training is not in place; check not in place. In many cases, due to the labor intensity of the staff is larger, more physical exertion, so the completion of the day's output, do the work of sorting the scene ignored the phenomenon, there are irregularities in the operation of the repeated repeated crushing accidents . Now want to come to these accidents, I have an inescapable responsibility. First: in the organization and management team in the process of daily safety training is not really so that every employee will always be safe production in mind; Second: in the security check did not do the whole process of tracking the entire inspection; Finally: in the event of an accident did not promptly Sum up lessons learned to avoid the recurrence of similar incidents. So that my staff suffered pain, so that the damage to the honor and interests of the workshop I am very self-blame. To this end, I decided to work in the future to strengthen the intensity of safety training and improve the form of training and strengthen the security team security responsibilities, so that each team staff are aware of the importance of safety in production, resulting in "everyone's attention to safety Production, everyone involved in production safety, "a good atmosphere.

2. Quality control aspects

Quality is produced, rather than check out, that is to say about total quality management, in accordance with the objectives and requirements to seriously do a good job in every aspect, every the same time quality inspection is very important, especially in the production process of quality inspection can effectively avoid the occurrence of quality accidents and quality problems, after the event for the prevention and control in advance, change from passive to ough the company from top to bottom are beginning to pay attention to quality, but in practice there are still many problems, especially between the team, for example, in the weaving process there are many areas to be improved. To solve these problems is not a team can do a good job, which requires a number of relevant team work together, I think in order to do a good job of quality, we must grasp the "strict, fine, real" principle, to strict management, Careful and meticulous, pay close attention to implementation.

3. Team management

Although the management level of the team has been improved in the past year, there are still some problems, such as: the standardized work situation of the staff to be improved, the technical level of the staff to be improved, the enthusiasm of the staff has not been fully mobilized high-level management, there is no high-quality staff, there is no high-quality products. Therefore, I will focus on the future work to improve the overall quality of the team and staff issues, make full use of spare time, and more arrangements for some of the knowledge of the standardization of training, strive for a shorter period of time so that the overall quality of staff has a larger Promotion.

Future efforts

The new year represents a new beginning, new opportunities and new challenges. I will redouble their efforts to seriously improve the business, the level of work for the company and workshop development, contribute their own strength.

I am determined to do the following in the following year:

1. Strengthen learning, broaden the knowledge. Strive to study stamping expertise and related management knowledge;

2. In the principle of seeking truth from facts, so the situation issued, the next situation reported; really good leadership of the assistant;

3. Strengthen communication and cooperation with the workshop brothers and team, to the advanced team to learn, strengthen management, and strive to make the team to form a solid, hard work and good atmosphere;

4. Fully completed the workshop to the various tasks for the workshop to bring out a tough fight, hard-working team.

Finally, I hope the company leadership in the future work, as always, support me, I will be more outstanding performance of the company's return on the leadership of care and love, because I will always work!Thank you!

工廠自我評價 篇10

In the twinkling of an eye, one year's work is spent in a tense and busy, the new year new starting point new opportunities and new challenges, I will work harder to learn, will improve my ability to work, do not live up to you Expectations, I will strive to do their jobs.

Since taking part in the work, I earnestly complete the work, study hard, think positively, individual ability rises gradually. I am thinking, learning, work has made new progress, but I also recognize that they have too many shortcomings, theoretical knowledge and low level of operation, skills are not strong. As a qualified operator, we must learn the rules of production equipment operating procedures, process safety knowledge and process parameters. Outside the loading operation process to pay attention to many things, no small mistake, there will be a big life-threatening risk of loss of economic dime, so everyone should take their own work to do to ensure safety in production . (Internal control of the job is very important, single-system, data, audit, monitoring, communication, communication, do not take five and so e check six pairs, check the driver tank volume table, pressure filling certificate, dangerous transport card ). In addition, the train is running fast also rely on the front, because just to work soon, in terms of experience, or from thinking there are many deficiencies in these areas I got the company leadership, department heads and squad workers of the correct guidance, The dragon is to carry out job training skills training, so that we have a better opportunity to enhance their theoretical knowledge of security and operational skills, in the learning process, I have a lot of uncertainty, we always patiently explain to me, I would like to express my heartfelt gratitude to all of you.

In short, into the company has more than a year (in the car loading unit under the leadership of master Ke) along the way, enjoy the pain, but also the luxury of happiness, there is no credit for labor, but either laughter or tears, Working for life, working for our dreams, we are brave to face a lot of difficulties, I think these will be the growth of each of us to the glorious stage of bit by bit.

upcoming, future work may be more difficult, more and more competition will give us a great deal of pressure, as long as the heart relaxed, the pressure into motivation, this is what we have been continuous progress Of the common ground, with the share of the ideals of hard work we will do better!

工廠自我評價 篇11

Time flies, years have been quietly away from us, looking back over the past year, the heart can not help but be filled with emotion. Over the past year, the company leadership and colleagues in the support and help, I am strict demands on themselves, in accordance with the requirements of the company and the workshop, to better complete their own work, and through efforts to make their own work in the new modelOf the breakthrough, the work has been greatly improved. The work in 20xx is summarized as follows:

First, the main work done

1. Workshop construction and management have been strengthened

Because I did not work for a long time, because of the chaotic management of the workshop, so in the workshop there are many problems to be solved. In order to solve these problems, I propose to take measures to regulate the implementation of positive incentive system in 20xx. For the better performance of the team to give employees plus assessment points, and for the poor performance of the staff are determined to deduct a certain assessment points. Take this rewards and punishments, fair and impartial assessment methods, I believe that the implementation of team staff will be greatly improved and will improve the team cohesion.

2. Pay close attention to safety management

After finishing the relative to the company's other workshops for more security risks, more prone to accidents, in the past 20xx, there have been several work-related accidents, these accidents have been to the company and the workshop losses. "Fool with blood for the lesson, the wise use of lessons to avoid accidents", although the power is not great, but shoulders the whole class of more than a dozen employees of the important task of life safety. Therefore, for security work I have never relaxed, Yueyue Jiang, every day.

3. To ensure product quality

With the expansion of the company's size and visibility of the increasing customer Xinhui the quality requirements are also getting higher and higher, so the company's high-level attention to product quality has also been referred to an unprecedented level. Xinhui as a whole the last pass, after finishing the responsibility to shoulder more and more. I know that as a workshop monitor, their work directly affect the quality of the work of the workshop. For the company's responsibility, I have been in quality control has been lax, and colleagues in a timely manner and timely communication and exchange of information, for the production process problems, defects never easily let go. At the same time to strengthen the importance of the quality of staff awareness, require everyone to do a good job self-inspection and mutual inspection work to ensure that a problem from the class into the market.

4. Actively participate in shop improvement activities

After finishing the workshop is like a big family, I live and work in this warm family every day, as a member of this family I think I have the obligation and responsibility to build her better harmony. Therefore, over the past year, I plot and workshop improvement activities, and mobilize the enthusiasm of team members, the use of collective wisdom of the workshop made a lot of valuable improvements.

5. Strengthen their own learning, improve the business level

Because of the heavy burden of their own body, and their knowledge, ability and experience with a good competent monitor have a certain distance, so the total can not be taken lightly, has been learning, learning to the books, learning to the surrounding leaders, To learn from colleagues, and actively improve the quality of their business, and strive to improve work efficiency and quality of work, for work ugh this year's efforts to feel that they still have some progress, be able to calmly deal with the daily work of the various problems, in the organization and management capacity, comprehensive analysis, coordination and writing skills and verbal ability, etc. A great improvement to ensure that the work of the normal operation of the post, to the right attitude towards the various tasks, with a strong professionalism, sense of responsibility.

工廠自我評價 篇12

理論學習方面：本人積極參加黨支部的組織生活，在思想上、政治上、行動上和黨中央保持高度一致，堅定共產主義信念;認真學習黨的xx屆六中全會的精神、hjt書記“”精神、方永剛同志先進事蹟等理論知識。

同時，作為一名工程技術人員，本人還認真學習與工作相關的網絡、視頻等相關知識，積極參加公司組織的各類業務培訓，不斷提高業務能力和工作能力。工作方面：一是本人積極向領導前輩們學習他們好的經驗，好的方法，通過一步一步學習、一點一滴積累，進一步提高自身的業務知識能力水平;二是通過主動請纓出差，在實踐中鍛鍊自身協調能力和工作能力，在帶隊施工過程中，發現存在問題，積極向領導們請教，加以改進。存在的不足：一年來，本人在思想、工作等方面都有一定程度的提高，但與優秀黨員的標準、與黨和人民的要求還存在一定差距，今後我將更加努力、勤奮工作，不斷提高自己的黨性修養，不斷增強為人民服務的本領，積極向優秀黨員的標準靠攏。

工廠自我評價 篇13

。在20xx年5月12日我在廣西市南寧貨運西站物流服務有限公司進行畢業生產實習。這是第一次正式與社會接軌踏上工作崗位。更進一步去研究物流。三個多月的實習鍛鍊時間在人生的長河中只有那麼一小段。但是給我的收穫卻很大，通過接觸和吸收新的事物。增長了見識，開闊了視野，又增長了實踐操作能力，解決了我的一些思想認識問題，促進了自身世界觀的轉變通過在廣州市新邦物流服務有限公司花都花動營業部受到的温暖，教育和鼓舞，使我增強了自信心和自豪感，堅定了自己的信念，更為自己日後就業指明瞭方向，對自己的社會定位和自身價值進行了一次客觀評價，發現自己與現實之間的差距，解決了眼高手低的問題。

在工作過程中發現平時對物流的概念，僅僅只是停留在淺顯的書本知識。對於物流的本身覺得很神祕，不敢想象現實中的物流業和心目中的物流業有什麼不同之處。對於物流，我只知道它是：運輸、儲存、搬運、包裝、流通加工、配送、信息處理等基本功能實施的有機結合。但沒有想到它的實際操作卻沒有這麼的簡單。三個月簡單瞭解，使我對於物流配送有了更加深刻的認識。中國的物流業雖然沒有國外發達，可這並代表中國物流業的落後，一些原則性[譬如中國勞動力廉價的國情]嚴重的制約了中國物流業信息技術化的發展速度。這一點作為國人的物流人士有着切膚的體會。貨物運轉速度慢，貨差貨損率高難以避免，高層貨架利用率嚴重低下。野蠻的裝卸態度更是制約中國物流業發展的瓶頸之一。

工廠自我評價 篇14

Since the beginning of my career, I have been constantly strengthening my self-cultivation, striving to improve the ideological and moral level, earnestly carry out the deepening of the cultural and professional knowledge, continue to explore new knowledge, forge ahead, and actively carry out intelligent range The work, the complete performance of a electrician's work responsibilities, from a good example to take the lead role. And actively participate in technological exchanges and technological innovation activities, the earth to do a good job, help, with the role, and fully completed the tasks assigned to the higher levels and targets in the company's production and development play its due I have been working since the professional and technical work are summarized as follows:

First, consciously strengthen theoretical study, and strive to improve personal qualities

Without a firm and true political orientation, there will be no positive guiding ideology. In order to continuously improve their political and ideological quality, the past few years I have been very concerned about national affairs, concerned about the situation at home and abroad, combined with the impact of changes in the situation of enterprises to analyze and put this idea into practical action to the production process to ensure In their thinking and action has always been consistent with the party and enterprise. At the same time, this idea into the work and study, the constant pursuit of their own progress. In order to be successful, a person's career must first learn how to behave! Especially in our highly technical work, to see things carefully, do things to concentrate on, to learn to be modest. Can not have the slightest sloppy and error. All the first work attitude to correct, have a good professional quality, work to be serious and responsible, subject to leadership arrangements, open to others to listen to advice and advice, to unite colleagues, courtesy, warm service.

Second, correct work attitude, play a leading role

I fully understand the importance of mechanical and electrical management during the construction period. In particular, it contains most of the invisible electrical infrastructure and engineering. It is necessary to supervise and inspect the problems at any time. We must solve the problems and never hastily. Otherwise, Eradication, which we place mechanical and electrical management in front of a test and responsibility. As an electrician, the responsibility and the burden of my duty. Therefore, in the usual work, I made myself some of the strict requirements: one in the face of dirty tired and bitter at work to grab the front of the workers dry, and more than the workers do the next; In the face of technical problems is to come forward and do their best to overcome technical difficulties; I always adhere to do my best to do everything to the interests of the company. Third, I asked myself to be responsible; I think that since he is an electrician, then the level of business and many other aspects of the general workers should be stronger than some. In the company assigned tasks, the general workers to complete the more difficult tasks, they should take the initiative to take on more, but not with the workers buck-passing, to make the teacher who demeanor, Yong burden. I usually not only ask their own, in practice, I also do according to these requirements.

Third, strengthen business learning, improve the technical level

Science and technology continue to develop today, one day do not learn to be backward. In particular, this piece of electrical automation, no one hundred percent of all proficient in finished, so I usually have time to look at professional books. Over the past year, I have collected a large number of new professional books, constantly enrich themselves, continue to grasp the new knowledge. Such as "electrical design drawing", "electronic technology", "modern frequency technology", "DC in industrial applications" and so on, in the process of learning this knowledge, I learned a lot of new knowledge, such as: PLC programming control Principle, ABB inverter settings and control principles, SIPMOS high-power two-way SCR control principle, and so I really benefit! Not only broadened my knowledge, is still largely improved my technical level, But also I have a higher level of theoretical and technical knowledge of the study had a keen interest.

Fourth, the development of skills to each other to achieve social services

In the usual work, I often carry out technical discussions and exchanges with other workers, to share their knowledge and share with others, and learn from others who do not understand their knowledge and achieve common progress. I am fully integrated theory and practice, continue to accumulate experience, continue to study new business, which makes my skill level to a skilled, use the ease of the point.

To sum up, I feel worthy of the honorable title of electrician! But I, as a technical staff, can not be narcissistic now, but still continue to strengthen their own learning, continue to learn from each other, and only then can keep up with The pace of the times steady progress, but also be able to better serve the enterprises and serve the community.

工廠自我評價 篇15

In the long-term work practice adhere to the "safety first, prevention first", strictly enforce the safety rules and regulations, based on their own positions, take the initiative to play a subjective initiative at the same time, adhere to the standard criteria for strict requirements themselves,Amount to complete the production work tasks.

Style solid, hard work hard working. Can strictly according to the standardization request, the procedure, the system and the measure, carries out each work, when meets the difficulty, perseverance, takes the initiative to overcome the difficult question which faces to face each duty which the leadership delivers. In the early stage of the workshop merger, the working facilities of the newly established Lechang power supply workshop were not complete. The workshop network could not be used. In order to transmit the production information in time, the communication equipment was put into operation to ensure the smooth flow of production information. In 20__, I carried out the first contact catenary repair, as a electric power for the contact network focused on the preparation of the work plan, from learning to application, from ignorant to gradually understand, all embodies the tenacious struggle of professionalism.

Consciously strengthen the theory and business learning, theory and practice for the workshop safety management services. In daily production and life of diamond business technology and adhere to the modern business culture and scientific knowledge, and constantly improve their theoretical level, business ability and quality of cultivation, and focus on the knowledge used in production safety practice, with the workshop leaders do a good job in production management, For the first-line production to contribute. In the early 20__ to combat snow and ice disaster work, take the initiative to grasp the front-line dynamic information on the scene of the fault repair situation, equipment dynamic situation in a timely manner to make statistics, summarize, reported materials for the leadership to understand the dynamics of the scene to provide first-hand information, Quickly convey the higher order, whether fault repair or normal equipment inspection, regardless of day and night, adhere to earnestly complete all the summary of statistical materials reported work.

Team management and construction work, work independently. Since the team to play the team building management work, to combine the safety management team, closely around the theme of security work, to be diligent in thinking, to explore, loyalty, dare to dare tube, dare to dare to listen to team Staff advice, subject to the workshop leadership arrangements, do the right to insist on doing a good job, there are gaps in the initiative to find reasons, adjust the working methods, so as to sum up experience and improve the quality of work. Lechang power supply plant tube equipment scattered, daily management team and complex work, bow net, hydropower all kinds of professional team has to distinguish between different types of work groups of relatively unified management, no doubt with considerable difficulty, need to pay more labor , Often without rest for this day and night to work.

工廠自我評價 篇16

Blink of an eye, busy in a quarter. I really feel in the past work, leadership and team in the workshop staff support and support, their gradually mature. Through the workshop organization of various training and activities, I have their own problems and deficiencies have a deeper understanding of the team management awareness has also been further improved. Here, I combine their own ideological situation, the actual work of self-criticism:

In the ideological, positive, positive motivated.

As a team leader, I am in the production, adhere to the quality, safety supervision, careful observation of the team members of the ideological trends, pay attention to communication methods and staff to make the greatest efforts and staff stand together to learn and work together to complete the team , Pay attention to the training of staff ability, at work, I know the importance of learning, seize every opportunity to earnestly study the excellent monitor, in continuous learning and practice constantly improve their management level and communication skills.

At work, dedication and love, self-discipline.

In work, strict self-discipline, strict to use, according to the size of re to the implementation of various systems, from time to time for the sake of employees, according to the rules of the company and the power to move the shop; a realistic man, the team raised a variety of staff questions never avoid, team also received the honor, team.

Self-existing problems:

1, policy theory Water evaluation is not high enough, the theory of learning is not enough, the management level is not high.

2, the first mode of consciousness is not strong. On their own lax, the standard is not high, just flies, not flies hard, can not use advanced words and deeds affect and drive employees. The work of the lack of first to strive for excellence and fighting spirit of innovation, study and study the theoretical knowledge and professional knowledge is not a certain height.

3, lack of awareness of innovation, the lack of bright spots.

4, open-minded enough, failing to easily impatient, lack of control

Fourth, the corrective measures:

1, to strengthen theoretical study, and constantly improve their political quality. Consciously strengthen the exercise to the idea of self-discipline armed with their own minds, to those dedicated, positive, innovative colleagues to learn, work more brains.

2, in order to be a high sense of responsibility, dedication, hard work, solid, the courage to advance the work to complete the task, in the process of regional management of the workshop team to a higher level.

3, establish team team spirit. As a team leader, I want to always keep a clear head, keep up with the pulse of the times, give full play to the subjective initiative. To consciously strengthen the exercise, at work, learn to sum up and observe, to improve the sense of pioneering and innovative

4, I am concerned about the labor and the new interns is not enough. In the future study, work more concerned about them, usually more chat to understand the ideological trends.

In short, as a team leader in the work to play an exemplary role, should be based on their own work, and strive to do their jobs, love and respect their jobs, fine drilling business. In the future study and work, I will continue to reflect on the continuous progress in the reflection. Humbly accept my colleagues around me to make suggestions and opinions, and strive to improve themselves, so that their continuous progress, play an exemplary role for the team to serve good, do a monitor should do the obligation, and strive to be a good team leader.

工廠自我評價 篇17

在實踐中能夠將理論聯繫實際，通過解決在實踐中遇到的問題，增長了自已見識和解決事情的能力，還學到了許多在以前沒有學到的東西。在生活上，認識了許多一起工作的同事們與他們相處融洽，在學習上能互相學習跟請教，能夠互相幫助，為人處世上也收穫了許多。很感謝海昌公司給我這次難得的實習機會和工作，也很感謝領導和車主管周班長對我的信任和關心，我也很珍惜這次機會，在這三個月試用中學會了很多東西，我相信如果能轉正將會為海昌工作的更多，自已也很學到更多。

熱情隨和，活波開朗，具有進取精神和團隊精神，有較強的動手能力。良好協調溝通能力，適應力強，反應快、積極、靈活，愛創新!提高自己，適應工作的需要。所以我希望找一份與自身知識結構相關的工作，如,文員,助理可以有更大的空間來證明自己，發展自己!

主要通過學校的老師專業只是的培訓,我的專業技能提供不少,對汽車維修的這樣專業有了更深的瞭解..為了讓自己的技術更加全面.我經常上網查閲網上有關汽車維修的專業知識.

一、通過系統完善的汽車專業知識的學習，有紮實的專業基礎知識，並且有一定的汽車管理知識。課外大量獵閲圖書館中汽車類書刊資料。瞭解中國汽車產業發展動態方向，特別是汽車後市場服務領域。知道汽車維修行業發展現狀及趨勢。善於學習新的知識方法工藝，分析和解決問題的能力強，能夠熟練的利用互聯網查詢汽車維修資料，收集本行業最新信息。

二、“老老實實為人，本本分做事”是一個立足社會的根本，也是我時刻銘記的一句話。擁有良好的職業素質和職業操守，能夠忠於自己的企業，將個人">個人的職業生涯規劃與企業的發展緊密的結合。勇於創新，善於開創，能承受較高的工作壓力;吃苦耐勞，注重合作，具有年輕人火一樣的工作熱情和活力。

三:學會把自己的技能應用在實際的應用上...

成為一個有技術，會管理，善經營汽車人。將是我一直努力和奮鬥的目標。當然在這個人">個人才濟濟的社會中我不一定是最好的，但我一定會努力的擠身於這一優秀的行列之中。在中國的汽車業中實現自己的社會價值。 我一定會成為一個有才能的汽車維修大師..也感謝..給我一個這樣的平台寫出自我鑑定!!!!

工廠自我評價 篇18

I work, has been engaged in a line of electrical work, over the years, I have strict demands on themselves, work conscientiously. Mainly from the following aspects to sum up:

First, the ideological and political learning and democratic management

I earnestly studied Marxism-Leninism, Mao Zedong Thought and Deng Xiaoping Theory, and guided the production practice in the spirit of the three represents.

Actively participate in all kinds of democratic activities, participate in democratic management, work hard at home, work well, and do a good job as a production frontline electrician.

Second, the safety aspects

1, implement the spirit of the higher documents to improve the safety awareness of workers, enhance the sense of responsibility of workers.

2, to implement and improve the safe use of electricity organizational system, improve safety management rules and regulations.

3, to strengthen safety management team to consolidate the security base.

4, one to ensure that electricity consumers to ensure their own safety and security of others.

Third, training and learning

Over the years, I actively participate in various learning and training, and strive to learn the basic knowledge of electrician knowledge, power supply system knowledge, line devices, lighting devices, grounding devices, transformer operation and maintenance, motor repair and maintenance, electrical control circuit, PLC Control and other related knowledge system. Every time I learn, I have learned some new theories, and used to guide the work practice, applied to the work, to the factory power supply system, the control system improvement, receives the consistent high praise.

Fourth, in terms of energy saving

In energy saving, I actively use the knowledge has been learned for the factory to do a lot of energy saving aspects of the contribution. Such as the transformation of the factory line, the annual energy saving for the factory more than ten million degrees. While the old factory equipment, electrical transformation, so that some of the old equipment to rejuvenate.

Fifth, the practice of production

In the production practice, for example: motor electrical fault detection and troubleshooting examples. Electrical: 1, check the lead wire insulation is intact, the motor is overheated, check whether the wiring meets the nameplate requirements, winding and the first, the end of power is correct; 2, measuring insulation resistance and DC resistance test insulation is damaged. 3, power on the check after the end of the problem found, you can directly power test with a three-phase voltage regulator began to impose a lower voltage, and then gradually increased to the rated voltage, etc .. 3, power-on check whether there is no open circuit, short circuit and grounding; . Use the above inspection method, for the factory more than one motor to find fault, and fix it. Timely summary of various symptoms and solutions, and documented, to guide the practice, but also improve their business level. In short, the production practice in the rules and regulations on the wall, in strict accordance with the rules and regulations. Over the years, the factory did not occur with a life-related electrical safety problems, and the factory through a number of technical transformation, equipment operation more scientific and rationalized.