成長記錄英文自我評價（精選20篇）

成長記錄英文自我評價 篇1

101 middle school has its strict school rules and discipline, the purpose is to let us become a good moral character and good students. I have been very loose in the junior high school period, but in 101 after I realized that as a student should have the character, from school to now, I have been strict self-discipline, abide by school rules and regulations, actively take the initiative for the school, To do a compliance 101 people.

I love the motherland in school, respect teachers, unite students, helpful, is a good helper teacher, the students good friends. I study diligently, positive, like and students to discuss and solve problems, often participate in class school organization of various inside and outside activities.

Of course, I also deeply aware of their own deficiencies, the word is not very good to write, and sometimes things will be only three minutes of enthusiasm, I believe that as long as overcome these problems, I can do better.

I can consciously abide by the rules of secondary school students, and actively participate in various activities, respect teachers, and students live in harmony, love and love the collective, willing to help others, labor actively and willingly, consciously exercise, and often participate in and organize class school organization of various classes activity.

I have good character, cheerful, love life, have a strong practical ability and organizational skills.

成長記錄英文自我評價 篇2

Passionate, cheerful personality I, good psychological quality, life, work optimistic, sincere, frank, good interpersonal relationships, can endure hardship, have strong adaptability and self-learning ability, not susceptible to external environment interference.

In learning, I have good grades, many times to be rewarded. In the study of professional knowledge, but also pay more attention to the combination of theory and practice. The use of spare time to learn the food industry related to other content, so that knowledge can be adapted to social development.

During the school, I have been a student cadre, a strong sense of responsibility, a strong organizational skills, leadership and good team spirit.

I have a wide range of interests, like reading, listening to music, sports, participated in various cultural and sports activities in various schools and colleges of activities to achieve good results.

成長記錄英文自我評價 篇3

High the next semester of life has officially opened the curtain. I want to combine the recent situation in the development of a learning goal: first, reasonable time, adjust the schedule, assign good learning, work, entertainment time. Second, the quality and quantity to complete the assignment of the teacher, the teacher assignments are generally her years of teaching experience in the summary, with high value, ... ... earnestly take the exam, exam carefully reviewed. In addition, actively read the books and information, to expand their knowledge; often ask questions, discuss with students, to seize the time to learn some other areas of professional knowledge, knowledge is always useful.

成長記錄英文自我評價 篇4

I am in this semester, has been to comply with the rules and regulations of the school, has a good ideological and moral qualities, all aspects of outstanding performance, a strong sense of collective honor and sense of responsibility, adhere to the principle of seeking truth from facts.

In learning, I study the correct attitude, good use of reference and use of scientific learning methods, while focusing on independent thinking, the courage to explore.

On the moral character, I have a good moral cultivation, and a firm political direction. I love the motherland, love the people, firmly support the leadership of the Communist Party and the socialist system, abide by the law, love public property, unite students, helpful and pragmatic spirit, enthusiastic participation in school public service and patriotic activities.

In my spare time, I actively participate in physical exercise, dedicated to the construction of class services, and conscientiously perform the duties of the student union cadres, school life for the rich and colorful, pay attention to personal all-round development.

Bao Jianfeng from sharpening, plum blossom from the bitter cold, I firmly believe that through continuous learning and efforts to make themselves an ideal, moral, cultural, disciplined students, with outstanding achievements and the overall quality to meet the challenges, To contribute to the socialist construction of my life force.

成長記錄英文自我評價 篇5

20xx is coming, recall the past 20xx, a sense of almost thousands.

During this period to seriously comply with the rules and regulations of the new group, love plants such as love home, but also at work

Constantly strict demands on themselves, with the Ministry of the production process work, the layout of the leadership to complete the various tasks. Diligent and enterprising, innovative, and continuously improve their work efficiency and found that the work of the problems in a timely manner to report to the leadership and seek solutions to the company's development and make greater contributions.

First, study with great concentration, conscious temper.

Although I took the forklift driving license is not long, just started, the operation is not particularly skilled, but in the course of my study, and consciously temper. After 3 months, I have been able to carry out skilled operation control, posts for three months to basically no mistakes, the ability to work has been greatly improved. For the future to complete the work to lay a solid foundation. I will continue in the next work, to further improve my professional level, at the same time to do a better job.

Second, strict requirements, love and respect their jobs.

Work in strict demands on themselves, diligent, love and respect their jobs, do not bow before difficulties do not back in front of the work, high-quality completed the work. In future work, I will humbly ask experienced instructors, and constantly sum up experience, to make up for their own deficiencies. At the same time, continue to learn a variety of theoretical knowledge and professional skills for the company's contribution to the development of their own strength!

Third, strengthen training, improve operational skills.

In order to do their work well, I make full use of limited time, strengthen the operation skills training, improve the efficiency of loading and unloading operations to ensure the safety of loading and unloading operations.Like trucks, before the operation must be loaded with the number of pieces of goods, specifications for serious study to determine the code put standard, so as to ensure the volume filled with the vehicle. I remember the beginning of forklift operations, I have flip twice.Since then, I have to strengthen all aspects of skills training, and achieved good results, summed up a set of forklift driver training methods.

Fourth, diligent in the repair, security protection.

As a driver, always bear in mind the important task of their own to ensure that leaders and comrades ride safety as their responsibility to maintain a high degree of concentration in the driving, and in strict accordance with the operating rules and road traffic rules, do foolproof. A little free, they studied with great concentration all kinds of traffic laws and regulations, compliance safety driving.Often read the traffic book, will be a variety of traffic routes memorize in the heart, driving in detours, less bad road, fuel-efficient festival. In the vehicle repair and maintenance, when a good "doctor" and "beautician" the dual role of the vehicle ground maintenance, ground maintenance, ground cleaning, skilled master of various vehicle technical performance, failure to remove, the vehicle is always in good condition status.

In the work of 20xx, although achieved certain achievements and progress, but the problems can not be ignored, such as: their own quality to be further improved, the sense of service to be improved and so on. In the future work, I will try to make up for these shortcomings, and comprehensively improve their overall quality, business level, quality of service.

Some people say that the choice of the driver on the choice of hard work, I will certainly be with the future of the hardship of the professional partner, but I will not regret it, because I am willing to pay for the cause of my enthusiasm, , I am willing to love this dedication to all the work.

成長記錄英文自我評價 篇6

Time flies, a flash of the new semester is about to begin, and slowly away from us in 20xx, the first semester of university life is officially announced the end, but the year 20xx, which will always have our beautiful Memories. This year we for our own goals, dreams, we cried we laughed, we also experienced the University of study and life, and here to get to know a lot of good students together, good friends, good brothers.

20xx was a very important and memorable year for me because there was a big change in my life both in my studies and in my life. University of the time day, week, month in the past, we met each other new students, together with military training, learning together, their choice of favorite associations. University life is very rich and very free, some people are busy, leisurely you can 24 hours at the computer game, but some people are busy, can be busy to the day without even the rest of time, I think the University has Two kinds of people, play dead and busy dead people, in fact, this is like an endless ladder on both sides, we are beginning to set sail in the middle, forward and backward are in an idea. I like the latter, so tired though, but full.

Recalling the freshman, I also have a lot of things to do in many ways is not good enough. In view of the lack of last semester, I feel we should try to start from the following aspects, and strive to do: 1 learning

(1) the study of specialized courses, should be clear objectives, take the initiative to overcome various learning difficulties, and constantly improve their interest in learning.

(2) to treat public courses, to recognize its practical value, and strive to indirect interest in public courses into direct learning interest.

(3) the study of elective courses, attention should be paid to only stay in the shallow understanding and understanding of the phenomenon.

(4) adjust the learning method.

After entering the university, the teacher-led teaching model has become a student-led self-learning model. Teachers teach knowledge in the classroom, the students not only to digest the understanding of classroom learning content, but also a lot of reading the relevant books and literature. It can be said that the level of self-learning ability to become the most important factors affecting academic performance. In college, the content of teaching content, including more and more large, sitting alone in the classroom hard to read is difficult to adapt. We must learn to use modern high-tech teaching methods to master and enhance the knowledge learned. Such as the Internet, libraries, to get a lot of information to improve their ability. Of course, college freshmen have to change some of the original concept: in the university, the test scores are not the most important indicators to measure people, people pay more attention to the comprehensive ability of the cultivation and overall quality improvement. Here, the competition is potential, all-round.

Interpersonal relations

Communication is the most important part of interpersonal relationships, is between people to pass emotions, attitudes, facts, beliefs and ideas of the process, so good communication refers to a two-way communication process, not a person in speech, Or play the other side to sing a one-man show, so in the study of life we should listen to each other's heart to say what? To understand each other thinking? The other side feel? And their own ideas back to each other. So I build good interpersonal relationships, we should start from the following aspects: the depth of self-awareness and acceptance; often sincere attitude; humble and gentle heart; moderate self-expression; respect and appreciate others; seek common values partner . 3 reasonable time arrangements

Students learning time is limited, reasonable time, great significance. I feel that we should make full use of the study time during the day because of good mental state during the day, memory, active thinking, daytime learning efficiency is equivalent to one and a half hours of the night. Every day before the class we are in the mind to do a simple learning plan, set yourself a small goal, to prevent unintended lectures. Pre-school supplies ready to learn what to do a simple preview, focus on lectures in class. Also, do not just focus on the whole time. Second, to co-ordinate arrangements for extra-curricular learning time, to deal with things for the priorities, you can use the "ABC" time classification, according to prioritized tasks are divided into A (important), B (minor), C (general) three. Important things to do first; secondary things, then deal with; flexible handling of the general things. In doing homework to adjust their state, as far as possible to make the brain, physical, emotional state in the best, the pursuit of higher efficiency.

Time flies, in a blink of an eye we in the beautiful campus of Agricultural University ushered in the sophomore of the second semester, each new start is a challenge, I believe that in this new semester, we can continue to Challenge yourself, continuous progress, the pursuit of a more exciting life!

成長記錄英文自我評價 篇7

Over the past year, according to the standards of Party members and leading cadres, I have been strict with myself, strengthened political belief, strengthened political theory study, changed work ideas, improved work style, adhered to honesty and self-discipline, conscientiously abided by the law and conscientiously performed their duties. Development concept. "

First, the German side

Conscientiously implement the democratic centralism, the overall situation. Respect leaders, unity and leadership of the majority of cadres and workers, thinking style is correct, work style at ease, dare to uphold the principle.

Second, in terms of energy

Familiar with and grasp the Changbu of the principles and policies can be a better combination of the actual situation to be implemented in the workshop; better coordination of all aspects of the relationship, and fully mobilize the enthusiasm of the staff work.

Third, in the ground aspects

I have a strong sense of responsibility, work seriously, a positive attitude, dare to be responsible, do not care about personal gains and losses; work diligent, hard work, hard working;

Fourth, in terms of performance

I work clear thinking, forward-looking strong, pioneering spirit, pay attention to working methods, high efficiency; can be completed on time or ahead of the tasks, the effect is good.

Fifth, in the area of integrity

Strict implementation and maintenance of the party's "four disciplines, eight requirements", consciously abide by the "honest political criteria", consciously do to abide by the party's discipline unswervingly. Enhance the sense of supervision, take the initiative to accept the party organizations, party members and the masses of supervision.

成長記錄英文自我評價 篇8

Students are very pleased to have the opportunity to share with you here on the growth plan of high school students a little experience and experience want to help you. First and talk to students to adapt to high school life. After a tense examination of the students with excitement and excitement into the high school campus. But with the passage of time with the freshness of the recession of many students will have all kinds of adaptive problems.

First, the living environment does not adapt to change. For a freshman, came to a new living environment. The original home life or collective life style and the existing collective lifestyle and the daily code of conduct requirements there is a great distance. And thus the new school life environment had a strong fit.

Second, the role of the conversion does not meet. Some high school freshmen in the original junior high school is the "top students" strong opponents now suddenly increased the original advantage will no longer exist "conceited." So the face of the new environment they will have lost, distressed, afraid of the psychological often miss the class before the collective rejection of the class.

Third, the new relationships brought about not suited. As the original study and living environment for the new students and teachers will have different expectations require an acceptance of the process. Some students will lack confidence in interpersonal communication often produce inexplicable sense of loneliness.

Fourth, learning to bring the inconvenience. After entering the high school students in junior high school to master the learning method will obviously not suited to high school learning. Some students will have an anxiety which is why there is even more exclusion of teachers and lead to learning landslides. Why are these not suited to us from the psychological point of view to analyze the causes of maladjustment where age characteristics of the adaptation difficulties. The psychological characteristics of adolescents determine that high school freshmen have a certain degree of atresia and self-centered interpersonal communication lack of initiative, thus hindering the communication and communication between each other. Self-loosening caused by difficulties in adaptation. Into the high school gate Many students will have the idea of breath. But see others are hard to learn their own hard to learn a floating heart is not up not to focus on up not to play is not happy to learn not practical. The results for a long time can not find the feeling. Family education errors caused by lack of adaptability. Parents have to replace everything which leads to their lack of independent life experience there is a strong dependence on psychological interpersonal ability is poor, difficult to adapt to high school independent life.

成長記錄英文自我評價 篇9

Time flies, a flash of the new semester is about to begin, and slowly away from us in 20xx, the first semester of university life is officially announced the end, but the year 20xx, which will always have our beautiful Memories. This year we for our own goals, dreams, we cried we laughed, we also experienced the University of study and life, and here to get to know a lot of good students together, good friends, good brothers.

20xx was a very important and memorable year for me because there was a big change in my life both in my studies and in my life. University of the time day, week, month in the past, we met each other new students, together with military training, learning together, their choice of favorite associations. University life is very rich and very free, some people are busy, leisurely you can 24 hours at the computer game, but some people are busy, can be busy to the day without even the rest of time, I think the University has Two kinds of people, play dead and busy dead people, in fact, this is like an endless ladder on both sides, we are beginning to set sail in the middle, forward and backward are in an idea. I like the latter, so tired though, but full.

Recalling the freshman, I also have a lot of things to do in many ways is not good enough. In view of the lack of last semester, I feel we should try to start from the following aspects, and strive to do: 1 learning

(1) the study of specialized courses, should be clear objectives, take the initiative to overcome various learning difficulties, and constantly improve their interest in learning.

(2) to treat public courses, to recognize its practical value, and strive to indirect interest in public courses into direct learning interest.

(3) the study of elective courses, attention should be paid to only stay in the shallow understanding and understanding of the phenomenon.

(4) adjust the learning method.

After entering the university, the teacher-led teaching model has become a student-led self-learning model. Teachers teach knowledge in the classroom, the students not only to digest the understanding of classroom learning content, but also a lot of reading the relevant books and literature. It can be said that the level of self-learning ability to become the most important factors affecting academic performance. In college, the content of teaching content, including more and more large, sitting alone in the classroom hard to read is difficult to adapt. We must learn to use modern high-tech teaching methods to master and enhance the knowledge learned. Such as the Internet, libraries, to get a lot of information to improve their ability. Of course, college freshmen have to change some of the original concept: in the university, the test scores are not the most important indicators to measure people, people pay more attention to the comprehensive ability of the cultivation and overall quality improvement. Here, the competition is potential, all-round.

Interpersonal relations

Communication is the most important part of interpersonal relationships, is between people to pass emotions, attitudes, facts, beliefs and ideas of the process, so good communication refers to a two-way communication process, not a person in speech, Or play the other side to sing a one-man show, so in the study of life we should listen to each other's heart to say what? To understand each other thinking? The other side feel? And their own ideas back to each other. So I build good interpersonal relationships, we should start from the following aspects: the depth of self-awareness and acceptance; often sincere attitude; humble and gentle heart; moderate self-expression; respect and appreciate others; seek common values partner . 3 reasonable time arrangements

Students learning time is limited, reasonable time, great significance. I feel that we should make full use of the study time during the day because of good mental state during the day, memory, active thinking, daytime learning efficiency is equivalent to one and a half hours of the night. Every day before the class we are in the mind to do a simple learning plan, set yourself a small goal, to prevent unintended lectures. Pre-school supplies ready to learn what to do a simple preview, focus on lectures in class. Also, do not just focus on the whole time. Second, to co-ordinate arrangements for extra-curricular learning time, to deal with things for the priorities, you can use the "ABC" time classification, according to prioritized tasks are divided into A (important), B (minor), C (general) three. Important things to do first; secondary things, then deal with; flexible handling of the general things. In doing homework to adjust their state, as far as possible to make the brain, physical, emotional state in the best, the pursuit of higher efficiency.

4 Linguistic aspects

In the university, we are from different places, because everyone's growth environment is so unreasonable to say so, how much slightly accent, so the new life in normal life and learning, should be more to the dictionary to learn good Mandarin Students learn to try to master the standard pronunciation. As a linguistic phenomenon applied to the public, Mandarin is closely related to people 's daily social life and is widely used in real life. So in order to better adapt to our society in the future, the time in the university should strive to improve their Mandarin level.

5 continuous self-evaluation

Correct self-evaluation is the condition that helps us to make the right direction of struggle, through two channels: direct self-evaluation and indirect self-evaluation. First of all, to recognize their own natural conditions, including health, mental state, emotional characteristics, interest, knowledge, professional expertise, intelligence, ability characteristics, and so on, followed by their own in different areas In practice to achieve the different results compared to find their own strengths, to determine the goal of struggle. Indirect self-evaluation method, refers to the behavior of others and the contrast of the situation and found that the dislocation of self-knowledge.

Time flies, in a blink of an eye we in the beautiful campus of Agricultural University ushered in the sophomore of the second semester, each new start is a challenge, I believe that in this new semester, we can continue to Challenge yourself, continuous progress, the pursuit of a more exciting life!

成長記錄英文自我評價 篇10

I am in this semester, has been to comply with the rules and regulations of the school, has a good ideological and moral qualities, all aspects of outstanding performance, a strong sense of collective honor and sense of responsibility, adhere to the principle of seeking truth from facts.

In learning, I study the correct attitude, good use of reference and use of scientific learning methods, while focusing on independent thinking, the courage to explore.

On the moral character, I have a good moral cultivation, and a firm political direction. I love the motherland, love the people, firmly support the leadership of the Communist Party and the socialist system, abide by the law, love public property, unite students, helpful and pragmatic spirit, enthusiastic participation in school public service and patriotic activities.

In my spare time, I actively participate in physical exercise, dedicated to the construction of class services, and conscientiously perform the duties of the student union cadres, school life for the rich and colorful, pay attention to personal all-round development.

Bao Jianfeng from sharpening, plum blossom from the bitter cold, I firmly believe that through continuous learning and efforts to make themselves an ideal, moral, cultural, disciplined students, with outstanding achievements and the overall quality to meet the challenges, To contribute to the socialist construction of my life force.

成長記錄英文自我評價 篇11

Over the past year, I always adhere to the "safety first, prevention first" approach, good grasp of plant safety management, and effectively control the workshop production safety and orderly. At the same time continue to strengthen the security team work, combined with my workshop to carry out a comprehensive weekly inspection work, to strengthen the safety and management team.

First, the fine "three management" mode. Workshop, section, team is the basic framework for safety management.

Strengthen the three-level management, to more clearly their respective responsibilities, fine security management positioning, strengthening the security management theme.

Second, improve the system construction, solid foundation management. In 20__, the workshop developed a detailed safety management system, combined with the actual workshop, organized, step by step to carry out the workshop training.

3, abide by the law, conscientiously study the legal knowledge; love and respect their jobs, with a strong sense of responsibility and dedication; work attitude is correct, serious and responsible.

Fourth, strengthen the study of clean government knowledge. To be honest and self-discipline, to improve their own beliefs do not waver, to strengthen awareness of laws and regulations, abide by the law, consciously abide by the supervision of the masses of workers.

成長記錄英文自我評價 篇12

Blink of an eye 10 years have gone, we ushered in a new year. Summing up the work of the past year, from a personal point of view about the measurement of awareness.

Quality is the life, quality is the fundamental guarantee for enterprise development. In the fierce competition in the construction market today, how to improve the construction quality management level is every enterprise managers must think about. Factors affecting the quality of construction in all aspects. From the engineering measurement point of view, analyze the work of measuring the pay-off to ensure and improve the quality of the construction of an important role, and simply how to strengthen the management of measurement work to improve the quality of construction.

It is a very important technical work of municipal road engineering that the measuring and measuring line is an important technical work. It is inseparable from the whole process of construction, from the preparation before construction to the completion of the construction, to the final acceptance after construction. How to do a quick and good measurement of the line, is a basic technical skills and test the basic requirements.

Do the measurement before the commencement of the end

Before the start of the project, the survey and design units shall be responsible for on-site surveying and settlement according to the design documents, and the site standard point, conductor piles and crossing point piles shall be clearly identified according to the design drawings. Within the measurement of signs, must take appropriate protection measures. On the measurement of the end, it is necessary to emphasize the protection of pile position, that is, in the design unit after pile, should be timely use of brick piers or pouring cement pier and other methods to be protected, so as not to lose. These piles are generally farmland or residential areas, it is easy to be man-made destruction, and once destroyed, let the survey and design units to fill test, then delay the construction, but also increase the cost.

Midline retest and edge loft

Center line measurement is based on the alignment measurement, the road center line plane position on the ground marked in detail. It is the difference with the alignment measurement is: alignment measurement, but the intersection of the road and the straight line segment of the necessary turning point marked out, and in the midline measurement, according to the intersection and the turning point with a series of stakes will road straight Segment and curve segments are specified in detail on the ground.

The alignment survey is usually carried out by the survey and design units, and then the pile and measurement results to the construction side, the construction unit by the middle line and construction measurement.

Subgrade construction should be fully restored before the center line, according to the restoration of the pile in the road and the relevant provisions of the roadbed side of the pile. On the midline re-measurement and edge lofting, should pay attention to the following points;

One should pay attention to the distance between the intersection, the direction is consistent with the drawings; such as an engineering project has several tenders, should pay attention to the center of the adjacent tenders are closed, midline measurements should be in-depth adjacent tenders 50 ~ 100 M; attention should be paid to the center of the structure such as bridge and culvert is closed; should pay attention to the relative position of the building and other buildings and drawings are consistent. If you find problems in a timely manner to identify the reasons for the design unit.

Second, retaining pile set. It is very important to set up pile protection pile in the middle of the road, but these piles are easy to be destroyed during the construction. Therefore, it is necessary to carry out the restoration and surveying work of the middle pile during the construction of the roadbed. In order to quickly and accurately restore the center pile in the original position, must be on the road before the construction of the main control point of the pile such as the intersection point, turning point, curve control points set up retaining pile. The so-called retaining pile, is outside the scope of the construction is not easy to be destroyed where some stakes set up.According to these pile, with simple methods (such as the intersection point, range, etc.), you can quickly restore the original pile point.

Set the pile should pay attention to the following aspects: in each straight section of the road, at least three control piles to set up retaining pile, so even if there is a control pile can not be restored, the other two points can be used to restore the straight section To the original position; the intersection angle of the two direction lines as close as possible to 90 °, should not be less than 30 ° angle of intersection; retaining pile should be selected outside the scope of construction, but not too far away; Pile distance can not be too far; The retaining pile must be solid and reliable, pile to facilitate the erection of measuring instruments and observation.

Set up retaining pile of curve side. For the curve segment, because of the more difficult to determine the side of the pile, re-measuring time-consuming more, so after a precise line, the edge of the curve section of the pile pile should also be set representative pile, which can reduce Repeat the measurement, reducing the measurement workload.

Third, the laying of mileage pile. After the midline pile is fixed, it is possible to lay out the control pile of the mileage pile on this basis. Mileage pile layout principle is: in the straight section, generally arranged in every 100 meters of the entire pile of cross-section, similar to the common road construction 100 meters pile layout; in the curve section of the pile to be properly encrypted, in the curve Mileage pile can be large stakes, above the mileage mark with paint or ink station, into the road outside the scope of construction on both sides of the ground, it is best to play on each side of a . To ensure that the construction is not easy to damage the case, from the embankment edge should be as close as possible to facilitate the use, generally 1 to 2 meters.

The laying of mileage piles is not addressed in most of the surveying and setting-out sections of the Construction Manual, and is not taken into account at many sites. I found in some sites, some construction technicians in the construction survey, the determination of the distance station is a long distance from a foot a foot row over, not only a waste of time and prone to cumulative error. If the mileage stakes are not allowed, then the elevation, slope quality control is out of the question.

Third, the proofreading and additional standard point

First, the use of design units set up before the standard point should be carefully checked, close the gap may not exceed the limit, such as exceeding the allowable deviation should identify the reasons and promptly reported to the relevant departments. The design unit delivers the leveling points normally set several months ago. These points in the field can easily be man-made collision or natural subsidence due to the ground changes, so be sure to carefully review before use; Second, the standard point of additional principles: the distance is generally 150 to 200 meters, Plus transfer station for the principle. The additional standard point should be closed with the design unit to pay the standard point, such as an engineering project at several tenders, but also with the adjacent standard segment of the standard point of closure, the closure may not exceed the limit.

The position of the leveling point shall be located on a solid, non-sinking, non-touching ground or a solid building of a permanent building. Can also be installed in the protection of deep-buried wood piles or concrete piles, and make clear signs. The leveling point should be checked once a month, and the level of the spot where the movement is suspected should be checked after re-inspection.

Vertical and horizontal cross-section measurement

Through the midline re-test, side piles line and the laying of the standard point, you can measure the vertical and horizontal cross-section. The main purpose of vertical and horizontal cross-section measurement is to calculate the amount of earth, so the vertical and horizontal cross-section measurement after the end of the measurement results should be checked with the design drawings. Where the results with the original within the allowable deviation, the original results shall prevail, and only when there are significant differences with the original results, can be reported to the supervisory engineer after verification changes. It should be noted that: the work must be carried out before construction. If the measured amount of earth and the design does not conform to the supervision of the approval should also be carried out before construction.Some site excavation to the supervisor before the actual amount of earthwork and design does not match, require additional visa, but the final supervision refused.So be sure to pay attention to the timeliness of the work.

成長記錄英文自我評價 篇13

Blink of an eye 10 years have gone, we ushered in a new year. Summing up the work of the past year, from a personal point of view about the measurement of awareness.

Quality is the life, quality is the fundamental guarantee for enterprise development. In the fierce competition in the construction market today, how to improve the construction quality management level is every enterprise managers must think about. Factors affecting the quality of construction in all aspects. From the engineering measurement point of view, analyze the work of measuring the pay-off to ensure and improve the quality of the construction of an important role, and simply how to strengthen the management of measurement work to improve the quality of construction.

It is a very important technical work of municipal road engineering that the measuring and measuring line is an important technical work. It is inseparable from the whole process of construction, from the preparation before construction to the completion of the construction, to the final acceptance after construction. How to do a quick and good measurement of the line, is a basic technical skills and test the basic requirements.

Do the measurement before the commencement of the end

Before the start of the project, the survey and design units shall be responsible for on-site surveying and settlement according to the design documents, and the site standard point, conductor piles and crossing point piles shall be clearly identified according to the design drawings. Within the measurement of signs, must take appropriate protection measures. On the measurement of the end, it is necessary to emphasize the protection of pile position, that is, in the design unit after pile, should be timely use of brick piers or pouring cement pier and other methods to be protected, so as not to lose. These piles are generally farmland or residential areas, it is easy to be man-made destruction, and once destroyed, let the survey and design units to fill test, then delay the construction, but also increase the cost.

Midline retest and edge loft

Center line measurement is based on the alignment measurement, the road center line plane position on the ground marked in detail. It is the difference with the alignment measurement is: alignment measurement, but the intersection of the road and the straight line segment of the necessary turning point marked out, and in the midline measurement, according to the intersection and the turning point with a series of stakes will road straight Segment and curve segments are specified in detail on the ground.

The alignment survey is usually carried out by the survey and design units, and then the pile and measurement results to the construction side, the construction unit by the middle line and construction measurement.

Subgrade construction should be fully restored before the center line, according to the restoration of the pile in the road and the relevant provisions of the roadbed side of the pile. On the midline re-measurement and edge lofting, should pay attention to the following points;

One should pay attention to the distance between the intersection, the direction is consistent with the drawings; such as an engineering project has several tenders, should pay attention to the center of the adjacent tenders are closed, midline measurements should be in-depth adjacent tenders 50 ~ 100 M; attention should be paid to the center of the structure such as bridge and culvert is closed; should pay attention to the relative position of the building and other buildings and drawings are consistent. If you find problems in a timely manner to identify the reasons for the design unit.

Second, retaining pile set. It is very important to set up pile protection pile in the middle of the road, but these piles are easy to be destroyed during the construction. Therefore, it is necessary to carry out the restoration and surveying work of the middle pile during the construction of the roadbed. In order to quickly and accurately restore the center pile in the original position, must be on the road before the construction of the main control point of the pile such as the intersection point, turning point, curve control points set up retaining pile. The so-called retaining pile, is outside the scope of the construction is not easy to be destroyed where some stakes set up.According to these pile, with simple methods (such as the intersection point, range, etc.), you can quickly restore the original pile point.

Set the pile should pay attention to the following aspects: in each straight section of the road, at least three control piles to set up retaining pile, so even if there is a control pile can not be restored, the other two points can be used to restore the straight section To the original position; the intersection angle of the two direction lines as close as possible to 90 °, should not be less than 30 ° angle of intersection; retaining pile should be selected outside the scope of construction, but not too far away; Pile distance can not be too far; The retaining pile must be solid and reliable, pile to facilitate the erection of measuring instruments and observation.

Set up retaining pile of curve side. For the curve segment, because of the more difficult to determine the side of the pile, re-measuring time-consuming more, so after a precise line, the edge of the curve section of the pile pile should also be set representative pile, which can reduce Repeat the measurement, reducing the measurement workload.

Third, the laying of mileage pile. After the midline pile is fixed, it is possible to lay out the control pile of the mileage pile on this basis. Mileage pile layout principle is: in the straight section, generally arranged in every 100 meters of the entire pile of cross-section, similar to the common road construction 100 meters pile layout; in the curve section of the pile to be properly encrypted, in the curve Mileage pile can be large stakes, above the mileage mark with paint or ink station, into the road outside the scope of construction on both sides of the ground, it is best to play on each side of a . To ensure that the construction is not easy to damage the case, from the embankment edge should be as close as possible to facilitate the use, generally 1 to 2 meters.

The laying of mileage piles is not addressed in most of the surveying and setting-out sections of the Construction Manual, and is not taken into account at many sites. I found in some sites, some construction technicians in the construction survey, the determination of the distance station is a long distance from a foot a foot row over, not only a waste of time and prone to cumulative error. If the mileage stakes are not allowed, then the elevation, slope quality control is out of the question.

Third, the proofreading and additional standard point

First, the use of design units set up before the standard point should be carefully checked, close the gap may not exceed the limit, such as exceeding the allowable deviation should identify the reasons and promptly reported to the relevant departments. The design unit delivers the leveling points normally set several months ago. These points in the field can easily be man-made collision or natural subsidence due to the ground changes, so be sure to carefully review before use; Second, the standard point of additional principles: the distance is generally 150 to 200 meters, Plus transfer station for the principle. The additional standard point should be closed with the design unit to pay the standard point, such as an engineering project at several tenders, but also with the adjacent standard segment of the standard point of closure, the closure may not exceed the limit.

The position of the leveling point shall be located on a solid, non-sinking, non-touching ground or a solid building of a permanent building. Can also be installed in the protection of deep-buried wood piles or concrete piles, and make clear signs. The leveling point should be checked once a month, and the level of the spot where the movement is suspected should be checked after re-inspection.

Vertical and horizontal cross-section measurement

Through the midline re-test, side piles line and the laying of the standard point, you can measure the vertical and horizontal cross-section. The main purpose of vertical and horizontal cross-section measurement is to calculate the amount of earth, so the vertical and horizontal cross-section measurement after the end of the measurement results should be checked with the design drawings. Where the results with the original within the allowable deviation, the original results shall prevail, and only when there are significant differences with the original results, can be reported to the supervisory engineer after verification changes. It should be noted that: the work must be carried out before construction. If the measured amount of earth and the design does not conform to the supervision of the approval should also be carried out before construction.Some site excavation to the supervisor before the actual amount of earthwork and design does not match, require additional visa, but the final supervision refused.So be sure to pay attention to the timeliness of the work.

成長記錄英文自我評價 篇14

I was on March 14, 20xx the company became a probation staff, and now one month trial period has expired, according to the company's rules and regulations now apply for full-time employees into the company.

Companies harmonious working atmosphere relaxed, united and progressive spirit of enterprise, let me quickly like on the job. Meanwhile, the company leadership and colleagues selfless help and guidance of patience, so I in a short period of time to adapt to the company's work environment, but also familiar with the process draftsman for the future can be quickly started work to lay the foundation.

Summary month work: Busy With full, along with learning gains. Under Jiang Jingli careful cultivation, I learned from some of the most basic proofreading start, the sense of learning, step by step forward, and now has been able to complete some independent drawing drawings, 3D mapping and 3D to 2D engineering FIG conversion. Previously not very skilled UG software has made great progress in this month's use of learning; for PRESSCAD previous month by not very deep understanding of learning can be proficient. Itself to greatly improve the technical level.

For three months I learned a lot, a lot of sentiment; see the company's rapid development and bright future, I feel proud, but also as a more urgent want a full-time staff here work to achieve their own struggle target, reflecting the value of your life, and grow with the company. Here, I propose regularization application, I continue to urge leaders to exercise their own, to achieve the ideal opportunity. I will humble attitude and enthusiasm to do my job, to create value for the company, together with the company's vision of a better future!

我於20xx年03月14日成為公司一名試用員工，到現在一個月試用期已滿，根據公司的規章制度，現申請轉為公司正式員工。

公司寬鬆融洽的工作氛圍、團結向上的企業精神，讓我很快喜歡上了這份工作。同時，公司領導及同事無私幫助和耐心指導，使我在較短的時間內適應了公司的工作環境，也熟悉了繪圖員的流程，為以後能快速地上手工作打下了基礎。

總結一個月的工作：忙碌伴隨着充實，學習伴隨着收穫。在蔣經理悉心的培養下，我從最基本的一些校對工作做起，踏踏實實的學習，一步一個腳印的前進，到現在已經能夠獨立完成一些圖紙的繪製、3D圖繪製以及3D到2D工程圖的轉換。以前不是很熟練的UG軟件在這一個月的運用學習中有很大的進步;以前對PRESSCAD瞭解不是很深通過一個月的學習可以熟練應用。自身技術水平的到極大地提高。

這三個月來我學到了很多，感悟了很多;看到公司的迅速發展和美好前景，我感到驕傲和自豪，也更加迫切的希望以一名正式員工的身份在這裏工作，實現自己的奮鬥目標，體現自己的人生價值，和公司一起成長。在此我提出轉正申請，懇請領導給我繼續鍛鍊自己、實現理想的機會。我會用謙虛的態度和飽滿的熱情做好我的本職工作，為公司創造價值，同公司一起展望美好的未來!

成長記錄英文自我評價 篇15

After a semester of baptism, I deeply feel that when a teacher is not simple, being a teacher is not simple. Require an infinite love, patience, and more importantly, such as needle-like fine mind can create transfer children thrive good education environment.

Class work is work manager, I face is vibrant, thinking, feeling, a strong desire for self-expression graders, so a semester, give me the most intense experience is: class teacher work have both macro management group, but also a micro personality development; also have a strong forward-looking; to work more meticulous in place, the only way to make the overall development of students in health class. As a first grade teacher, I am against our class lively features, do the following work:

First, strengthen general education, training the children's consciousness.

He recalled the case of the first month of school, and is more difficult. Day, such as "hen hatching" Usually sitting in class. From sit-stand, raise their hands, queuing, dining etc. You teach from. A week later, the students gradually learned when every day as anything. So, I combine the work of planning, the use of the morning meeting, the class will equal time, from discipline, learning, health, safety, humanities, etc., the students standardization of education, so that they understand that what to do, not to do what things . Over time, the student code of conduct much progress has been basically adapted to primary school life.

Second, more recognition and more incentives to stimulate the child's self-motivated.

Daily morning reading lesson, I will encourage children to read the text in his own way, and in the course of the inspection tour, the students studying seriously big praise, class time called them before talk about the heart, admire their merits. Students' enthusiasm increase every morning reading lesson they learn from reading the text. Daily cleaning of classrooms and other habits, and I will follow the method of reward morning reading sessions and a comprehensive evaluation at the end of one week to, or have done well in all aspects of progress in certain aspects, in particular bad habits get rid of some, I will award them a star, they spur the use of the child's self-motivated. Praise the children see the class standings stars are particularly happy, and some of them even to the class in the morning to the time to be careful not to see the stars are out.

Third, and parents more contact, more exchanges and jointly promote the child's development.

I think that a person can not survive without affecting the family. The impact on the child's teacher and then a big, if not the response and cooperation of the family, must be weak in. So I often use when parents pick up the child, and parents communicate, to express their views on the child's education, reflecting the child's performance in school and to make some suggestions and so on.

Unknowingly passed a semester, the students into the school from now, we can say the children's progress is great, will learn, express, with teachers, students exchange, can take the initiative in health class, and some small when cadres have a kind of mold, and can compare and abide by the rules and regulations of the school.

Fourth, do the work of transforming backward students

Our class, there are a few underachiever. Accordingly, Conversion underachiever is an essential work of the teacher. I think of poor students should be given special care. To do ideologically non-discrimination, not emotionally tired, the attitude is not rude. Poor students to use their own piece of sincere love, go knocking on the door of their heart. To be good at discovering their shine. For example: in the classroom do not riveted honors, should give underachiever create conditions to encourage them to raise their hands to speak, be given prompt recognition, rewards, so that they can confidently face learning. Extracurricular active counseling, and more contact with parents for joint home-school students to create a good learning environment, but also to promote the class learning environment.

Fifth, often made with the classroom teachers to contact, to understand students' learning, collaborative student learning purpose of education is to stimulate interest in learning, hard to learn the will of the Church to learn, to learn all the subjects, and master academic burden on students amount.

Through the above working class students discipline, learning, health, daily behavioral norms and so have a greater change, education for the future work to lay the foundation. Of course, the working class is a science, you need to continue to explore, in the future I will continue to work, due diligence and do this work.

經過一學期的洗禮，讓我深深感到當一名教師不簡單，當一名班主任更是不簡單。需要無限的愛心、耐心，更要有如針般細的心，才能創造出讓孩子茁壯成長的良好教育環境。

班主任工作是管理人的工作，我所面對的又是朝氣蓬勃，有思想，有感情，自我表現欲強的一年級學生，所以一個學期下來，給我最最強烈的體會是：班主任工作中既要有宏觀的羣體管理，又要有微觀的個性發展;還要有強烈的前瞻性;工作更要細緻的落實到位，只有這樣才能使學生在班上健康全面發展。作為一年級班主任，我針對我們班活潑好動的特點，做了如下的工作：

一、加強常規教育，培養孩子們的自覺性。

回憶起開學第一個月的情形，的確比較辛苦。每天如 “ 母雞孵蛋 ” 一般坐在班中。從坐站、舉手、排隊、用餐等一一教起。一個星期之後，學生漸漸地知道了每天何時當做何事。於是，我結合制定的工作計劃，利用晨會、班會等時間，從紀律、學習、衞生、安全、人文素養等方面，對學生進行規範化教育，使他們明白該做哪些事情，不該做哪些事情。時間一長，學生的行為規範大有進步，已基本上適應了國小生活。

二、多表揚多獎勵，激發孩子的上進心。

每天的早讀課，我都會鼓勵孩子用自己的方式朗讀課文，並在巡迴檢查的過程中，將認真讀書的學生大肆表揚，下課的時候把他們叫到面前談談心，誇誇他們的優點。學生積極性大增，每天早讀課他們都學習自讀課文。每天的教室打掃和其他的行為習慣，我也都會沿用早讀課的獎勵方法，併到一星期結束時進行全面評價，各方面都做得好或在某一方面有進步的，特別是壞毛病改掉一些的，我都會獎他們一顆星，利用孩子的上進心鞭策他們。小朋友看到班級中的表揚榜上的星星都特別的開心，有的小朋友甚至早晨到班級中來的時候都要認真的看一看星星是不是掉了。

三、和家長多聯繫，多交流，共同促進孩子的發展。

我認為，一個人的成長離不開家庭的影響。教師對孩子的影響再大，如果得不到家庭的響應與合作，必然是勢單力薄的。所以我經常利用家長接送孩子的時候，與家長交流，表達自己對教育孩子的看法，反映孩子的在校表現和提出一些建議等等。

一學期不知不覺過去了，從學生進校到現在，可以説孩子們的進步是很大的，會學習，會表達，能與老師、同學交流，能主動做好班上衞生，有的小幹部也當得有模有樣，並能比較自覺地遵守學校的各項規章制度。

四、做好後進生的轉化工作

我們這個班，後進生還是有幾個。因此，轉化後進生是班主任的一項必不可少的工作。我認為對後進生要給予特別的關愛。要做到思想上不歧視，感情上不厭倦，態度上不粗暴。要用自己對差生的一片真誠的愛心，去叩響他們的心靈之門。要善於發現他們的閃光點。比如：在課堂上不要緊緊盯着優等生，應多給後進生創造條件，鼓勵他們舉手發言，及時給予肯定、獎勵，使他們也能自信地面對學習。課外積極輔導，多與家長聯繫，爭取家校聯合為學生創造一個良好的學習環境，同時也促進班級學習氛圍。

五、經常與任課教師取得聯繫，瞭解學生的學習情況，協同對學生進行學習目的教育，激發學習興趣，培養刻苦學習的意志，教會學習方法，學好各門功課，並掌握學生的課業負擔量。

通過以上工作，本班學生紀律、學習、衞生、日常行為規範等都有了較大轉變，為今後的教育教學工作打好了基礎。當然，班主任工作是一門科學，需要不斷探索，在今後的工作中我將不斷努力，盡心盡責做好這一項工作。

成長記錄英文自我評價 篇16

years is approaching, review the past years, a sense of almost thousands. During the period to seriously abide by the rules and regulations of the company, love plants such as love home, but also in the work of constantly demanding their own, with the production of the process work, carefully completed the task of leading the layout. Diligent and enterprising, to be creative, to continuously improve their own work efficiency, work problems can be found in time to report to the leadership and to find a solution. In order to make greater contributions to the development of the company.

Forklift is the indispensable tool for production, as a forklift driver, must adhere to the post, serving the production of the work. Forklift with the class every day must be used with the packaging class to receive bags, finished packaging storage placed; with the use of handyman with additives, from the use of oil raw materials, empty oil drums finishing.

First, the work results

1, in line with the packaging class to receive the work of the bag, 20 minutes per shift to work in advance to help with the work of the packaging.

2, the production peak season, seven packaging lines at the same time boot, forklift task overload operation, the two forklift drivers must be division of labor, it takes more than an hour to return to the packaging mouth to help packaging finished product storage work. In the meantime, another forklift driver with seven production lines need to work in the library, it must have a more skilled professional skills and flexible thinking ability to complete the task in an orderly manner. In such a tense working environment, I can not disrupt, in strict accordance with the warehousing requirements of finished products placed in the work.

3, in the use of additives, with the mixed with a good job, a clear position of additives placed to help the correct use of good handyman, including the variety, quantity, in strict accordance with the laborers with a single recipients associated with the requisition process.

4, fork grease must be clear that the use of phospholipids and fish oil situation, in strict accordance with the warehouse manager's logo fork with, if the warehouse manager failed to do a good sign, must first communicate with the warehouse manager to do a good job marking, eliminate the use of errors Or can not be used on a first-in-first-out basis. And fork to the workshop before the use of varieties, regional requirements placed, and in the pumping process in strict accordance with the requirements of the fork with the fork into the corresponding oil pool, no personal reasons affect the production, to ensure the smooth development of production. Before get off work, assist the handyman to store the empty oil bucket into the oil bucket area and keep the sanitation of the production area.

成長記錄英文自我評價 篇17

Good people management and communication skills. Team player.有良好的人員管理和交際能力。能在集體中發揮帶頭作用。

Able to work under high pressure and time limitation.能夠在高壓力下和時間限制下進行工作。

Be elegant and with nice personality.舉止優雅、個人性格好。

With good managerial skills and organizational capabilities.有良好的管理藝術和組織能力。

The main qualities required are preparedness to work hard, ability to learn, ambition and good health.主要必備素質是吃苦耐勞精神好、學習能力優、事業心強和身體棒。

Mature,self-motivated and strong interpersonal skills.思想成熟、上進心強，並具極豐富的人際關係技巧。

Energetic,fashion-minded person.精力旺盛、思想新潮。

With a pleasant mature attitude.開朗成熟。

strong determination to succeed.有獲得成功的堅定決心。

strong leadership skills.有極強的領導藝術。

Ability to work well with others.能夠同他人一道很好地工作。

Highly-motivated and reliable person with excellent health and pleasant personality.上進心強又可靠者，並且身體健康、性格開朗。

The ability to initiate and operate independently.有創業能力，並能獨立地從業。

strong leadership skill while possessing a great team spirit.有很高的領導藝術和很強的集體精神。

Be highly organized and effecient.工作很有條理，辦事效率高。

Willing to learn and progress.肯學習進取。

Good presentation skills.有良好的表達能力。

Positive active mind essential.有積極、靈活的頭腦。

Ability to deal with personnel at all levels effectively.善於同各種人員打交道。

Have positive work attitude and be willing and able to work diligently without supervision.有積極的工作態度，願意和能夠在沒有監督的情況下勤奮地工作。

Young,bright,energetic with strong career-ambition.年輕、聰明、精力充沛，並有很強的事業心。

Having good and extensive social connections.具有良好而廣泛的社會關係。

Being active, creative and innonative is a plus.思想活躍、有首創和革新精神尤佳。

With good analytical capability.有較強的

成長記錄英文自我評價 篇18

After three months of probation, I learned a lot at work. Financial cashier work seems to be simple, but it needs to do a lot of careful and patience, but also need to be cautious. For each sum of money for reimbursement, carefully, strictly in accordance with the company's financial system, and in accordance with the procedures for the implementation, in case of special circumstances are special treatment to ensure the normal operation of the company. To make cashier work can not use the "easy" to describe, it is the first line of financial work, financial revenue and expenditure of the juncture in the company's management plays an important role. As a qualified cashier, must have the following basic requirements: First, learn, understand and master the policies and regulations and company system, and constantly improve their level of business and knowledge and skills. Then, cashier personnel to abide by the good professional ethics. Second, the cashier must have a strong sense of security, cash, notes, all kinds of seals, it is necessary to have the internal custody of the division of responsibility, but also to contain each other.Finally, good communication skills, especially for others to explain or convey the relevant financial matters, good communication and expression can reduce the number of unnecessary unnecessary misunderstanding, greatly improve efficiency. Of course, in many ways, due to their professional knowledge, ability limitations, there are still some deficiencies in the future work in addition to abide by the above basic four points, I will continue to study hard to improve their professional skills, To adapt to the changing social environment and future work carried out by the company, with the times.

These are my three months of this work I have some experience and summary. In the future work and study I will make unremitting efforts to do their own work, and the road with the company's development in sync. At the same time actively assist others, the common development for the company. I sincerely thank the company leaders and colleagues for their support and concern in their work and life. I also earnestly ask the leaders of the company to give me a chance to continue to exercise and realize the ideal. I will use modest attitude and full of enthusiasm to do my own work, create value for the company at the same time, so that their own towards a higher level.

成長記錄英文自我評價 篇19

High the next semester of life has officially opened the curtain. I want to combine the recent situation in the development of a learning goal: first, reasonable time, adjust the schedule, assign good learning, work, entertainment time. Second, the quality and quantity to complete the assignment of the teacher, the teacher assignments are generally her years of teaching experience in the summary, with high value, ... ... earnestly take the exam, exam carefully reviewed. In addition, actively read the books and information, to expand their knowledge; often ask questions, discuss with students, to seize the time to learn some other areas of professional knowledge, knowledge is always useful.

I am in this semester, has been to comply with the rules and regulations of the school, has a good ideological and moral qualities, all aspects of outstanding performance, a strong sense of collective honor and sense of responsibility, adhere to the principle of seeking truth from facts.

In learning, I study the correct attitude, good use of reference and use of scientific learning methods, while focusing on independent thinking, the courage to explore.

On the moral character, I have a good moral cultivation, and a firm political direction. I love the motherland, love the people, firmly support the leadership of the Communist Party and the socialist system, abide by the law, love public property, unite students, helpful and pragmatic spirit, enthusiastic participation in school public service and patriotic activities.

In my spare time, I actively participate in physical exercise, dedicated to the construction of class services, and conscientiously perform the duties of the student union cadres, school life for the rich and colorful, pay attention to personal all-round development.

成長記錄英文自我評價 篇20

1, political and ideological aspects

Adhere to the study of Marxism-Leninism, Mao Zedong (reproduced in: measuring professional work self-identification) East thought, practice "Three Represents", establish a scientific concept of development. Always strict demands on themselves, based on their own, assiduously business technology, and strive to do a good job. Listen to a variety of superior field, throughout the county to carry out measurement work, regardless of the working environment, can be consistent, perseverance to do their own work. Work hard, active, practical style, diligent in thinking, efficiency, and always maintain a strong sense of dedication and dedication, and actively contribute to the development of measurement work ideas, dedicated their meager strength.

Second, professional and technical work

Since I joined the work, I have worked hard to learn engineering knowledge and improve my job skills in order to meet the needs of my work. Through my own efforts and with the help of my colleagues and leaders, I have been able to work effectively and efficiently. Since taking office, I actively undertake the work of engineering surveying tasks, can be done conscientiously, the successful completion of the tasks assigned by the organization, never for their own private affairs affect the normal work, and actively participate in the organization of the activities. The following are the major tasks that have been completed since my appointment:

1, according to the county party committee and government requirements to complete the county key town topographic map measurement and county control planning topographic mapping measurement; 2, since 20xx to complete the county 21 townships new community, farmer settlement survey work;

3, the synergy to complete the county key projects and investment projects related to measurement work;

4, completed the industrial park and the backup industrial park topography measurement 18 square kilometers;

5, the completion of the municipal government issued a special standardization of the topographic maps, map measurement work;

6, to complete the county key road Avenue, Avenue, Road, Avenue vertical and horizontal cross-section measurement, strip chart measurement;

7, coordinated the completion of the county control network encryption and cors station construction;

8, to complete the footwear industrial park, Sands commercial center, building materials market and other urban and rural integration projects to promote the work of measurement. In order to better adapt to the measurement work, and strive to do their own work at the same time. I attach great importance to continuing education and learning, and actively participate in various departments of the organization of laws, regulations and professional and technical training.

Third, the existing problems

Measurement and management related to the ability and level to be improved, not enough innovation. In future work, I will be more hard to learn, use the knowledge to strive to enhance the level of operational capacity, and constantly improve the working methods, improve the work.

For efficiency, down-to-earth, hard working, hard work, to become an excellent measurement of professional and technical personnel.